tnite
10-05 09:28 AM
My PERM approval came through Aug 14, so all done in a hurry. 140/485 (concurrent-mailed) /ead/ap sent aug 16th, received on aug 17.
Since it was done quickly, couldn't wait for PERM hard copy approval (came 1 wk later), 140 was submitted without PERM approval hard copy. lawyer included printout of ETA 9089 approval/form from online with OBM approval number on it, signed by me/employer. Also included screen shot from DOLETA of perm approval.
My question...from anyone else's experience/info
Will I get a RFE for the PERM LC hard copy or a rejection?
How does that affect my pending EAD/485? think i know answer..all goes down, right?
I hope I get a RFE, not rejectiong on 140.
anyone have any info, experience, please share..
I dont think you will get a rejection. RFE is the most likely answer
Am I 100% sure, No
Since it was done quickly, couldn't wait for PERM hard copy approval (came 1 wk later), 140 was submitted without PERM approval hard copy. lawyer included printout of ETA 9089 approval/form from online with OBM approval number on it, signed by me/employer. Also included screen shot from DOLETA of perm approval.
My question...from anyone else's experience/info
Will I get a RFE for the PERM LC hard copy or a rejection?
How does that affect my pending EAD/485? think i know answer..all goes down, right?
I hope I get a RFE, not rejectiong on 140.
anyone have any info, experience, please share..
I dont think you will get a rejection. RFE is the most likely answer
Am I 100% sure, No
wallpaper quotes on your wall. the
NikNikon
October 23rd, 2005, 09:30 AM
Sounds good to me. QJ?? Anyone else?
Speaking of QJ I haven't seen much activity from her lately, you still out there Queen?
Speaking of QJ I haven't seen much activity from her lately, you still out there Queen?
Saralayar
08-16 11:01 AM
i dont see any of the above said...:o..how lond does it take for us to receive rn in hand after the checks are cashed...I am starting to worry now.If everybody can see the rn why icant i!:o...The uscis cs is not telling the status...Is there a possiblity of appl rejection even after the checks are cleared.:confused::confused:
Thanks.
I don't know why guys are so anxious about the reciept number. When they get the reciept number mail, they are going ot have all the details. Unnecessary anxious. What you guys are going to do with your reciept number known early?. Is it going to speed up your GC process?. Be cool and wait. You will get everything...
Thanks.
I don't know why guys are so anxious about the reciept number. When they get the reciept number mail, they are going ot have all the details. Unnecessary anxious. What you guys are going to do with your reciept number known early?. Is it going to speed up your GC process?. Be cool and wait. You will get everything...
2011 quotes for walls. if your
smakur
07-16 05:24 PM
Some of my friends did this. A common example is if you work in company A and your spouse works in Company B. Since you typicaly go through the company's lawyers and you do not know who is going to file when, it is generally a good idea to list one spouse a dependant of the other. So you get he earliest receipt date possible.
If USCIS receives both the applications, it will return the second application as a duplicate. I don't kow if they keep the money though
However, if the same lawyer is preparing both your applications, then there is nothing to gain. So you should just file your own 485s (why risk losing the filing fee) or file one 485 (earlier PD with the spouse listed as a dependant).
If USCIS receives both the applications, it will return the second application as a duplicate. I don't kow if they keep the money though
However, if the same lawyer is preparing both your applications, then there is nothing to gain. So you should just file your own 485s (why risk losing the filing fee) or file one 485 (earlier PD with the spouse listed as a dependant).
more...
dpp
10-18 02:20 PM
I said it may be and so it is better to check with attorney. There is nothing wrong in checking with attorney so that he can clarify the doubts.
That is so wrong, you are linking this to the criminal database?
SO as soon as the finger printing is done, within a fraction of a second, they match your fingerprints to the criminals and even let you know that by displaying a Red sign. Cant believe a Senior member can come up with such an explanation.
Leos link has the answer, the red Not match found error is simply an error between your finger prints taken together and then done individually.
The Service rep also individually goes thru all the FPs to check if the FPs taken together match those done individually.
That is so wrong, you are linking this to the criminal database?
SO as soon as the finger printing is done, within a fraction of a second, they match your fingerprints to the criminals and even let you know that by displaying a Red sign. Cant believe a Senior member can come up with such an explanation.
Leos link has the answer, the red Not match found error is simply an error between your finger prints taken together and then done individually.
The Service rep also individually goes thru all the FPs to check if the FPs taken together match those done individually.
gk_2000
05-20 05:31 PM
I have Master's degree from US and have been with the company for 6yrs. This is the response from my Attorney on porting to EB2 category. My I485 was filed during July 2007. What can i do to be able to file a new PERM LC for porting to EB2 category without affecting my I485 application? Please advise.
Thank you for your email inquiring about filing a new PERM labor certification (PERM LC) application to qualify for the EB-2 preference category. A final determination has been made on whether a new PERM LC can be filed.
Regulations that govern the PERM Labor Certification process do not permit an employer to file a new PERM LC application for the sole purpose of shortening the wait time in immigrant visa preference categories. Company will not file a new PERM LC unless it is clearly required by regulation.
We completed our research and legal analysis. The purpose of the research was to determine whether you can still benefit from your current case, or whether substantial job changes require, by law, a new PERM LC application to be filed on your behalf.
Our final assessment is that while some job changes have occurred, the changes are not substantial in the context of labor certification regulations. Please note that while the group, products and/or daily tasks in your employment may be different, these changes are not substantial from an immigration perspective and do not require a new PERM LC. In addition, portability provisions of the law allow considerable flexibility for job changes when an I-485 Adjustment of Status application has been filed.
This is not an internal policy matter, rather company's compliance with U.S. Department of Labor regulations that govern the PERM LC process.
Translation: We are an a$$#ole company that is not interested in retaining their talent. You are better off trying somewhere else and getting your GC, and coming back and joining us, then sc*** us by becoming our boss
Thank you for your email inquiring about filing a new PERM labor certification (PERM LC) application to qualify for the EB-2 preference category. A final determination has been made on whether a new PERM LC can be filed.
Regulations that govern the PERM Labor Certification process do not permit an employer to file a new PERM LC application for the sole purpose of shortening the wait time in immigrant visa preference categories. Company will not file a new PERM LC unless it is clearly required by regulation.
We completed our research and legal analysis. The purpose of the research was to determine whether you can still benefit from your current case, or whether substantial job changes require, by law, a new PERM LC application to be filed on your behalf.
Our final assessment is that while some job changes have occurred, the changes are not substantial in the context of labor certification regulations. Please note that while the group, products and/or daily tasks in your employment may be different, these changes are not substantial from an immigration perspective and do not require a new PERM LC. In addition, portability provisions of the law allow considerable flexibility for job changes when an I-485 Adjustment of Status application has been filed.
This is not an internal policy matter, rather company's compliance with U.S. Department of Labor regulations that govern the PERM LC process.
Translation: We are an a$$#ole company that is not interested in retaining their talent. You are better off trying somewhere else and getting your GC, and coming back and joining us, then sc*** us by becoming our boss
more...
thakkarbhav
08-20 09:10 AM
No. Never heard about this type of situation. Can you call customer service center to find out what is going on. Also you are current so something should come on your way....
2010 quotes on your wall.
logiclife
08-02 11:18 AM
EB3 with PD of July 2006. I-140 Approved. 485 +EAD+AP filed 2 weeks ago.
I was contemplating on job change before dates became current in June and decision to accept 485....
Now that 485 is filed and this DUST has settled, wondering whether all this is worth the wait. (even 180 days).
Currently in my 5th year of H1b, by waiting out the 6 months, I'll also get 3 yr h1b ext. (and hopefully ead by then).
So is waiting 180 days the best choice? or screw all this and change! (I dunno if this AC21 etc etc is practical...same job description etc)
(I am single and those complexities are not to be considered I guess yet.
Plan is to try and change jobs on H1b and use EAD only if there is a dire need like layoff to find another job quicker)
EAD is really worth having, especially in IT, because finding jobs with same or similar job description is not difficult.
Even if not in IT, the ability to start working for someone without bothering that employer to sponsor your H1 is a HUGE PLUS. HUGE and I mean really really really HUGE.
Also, if you are in IT, and if job market becomes worse, then employers have more choice and during those times, they get picky and choosy and ask for candidates who have work authorization (Meaning, EAD or GC or citizenship) so that they dont have to sponsor H1 and go thru those hassles. (employers get sick of USCIS delays too).
Therefore, whether you want to stay with same employer, or change to new one, having EAD is a big benefit because having EAD is same as having GC (after 180 days of 485 filing) with one caveat : with GC, you can change profession, or stay at home and not work....with EAD, you need to work and you need to be within the same job description.
Not to mention, the travel benefits. When 485 is pending, in addition to EAD, you get AP for travel and AP is guaranteed re-entry after a visit outside USA. IF on H1, you need to have H1 stamp and if H1 stamp on passport is expired then you have to spend time gathering documents and getting consulate appointment and getting H1 stamp -- Something that causes unneccesary anxiety and too much heartburn and potentially ruins the vacation due to anxiety.
I was contemplating on job change before dates became current in June and decision to accept 485....
Now that 485 is filed and this DUST has settled, wondering whether all this is worth the wait. (even 180 days).
Currently in my 5th year of H1b, by waiting out the 6 months, I'll also get 3 yr h1b ext. (and hopefully ead by then).
So is waiting 180 days the best choice? or screw all this and change! (I dunno if this AC21 etc etc is practical...same job description etc)
(I am single and those complexities are not to be considered I guess yet.
Plan is to try and change jobs on H1b and use EAD only if there is a dire need like layoff to find another job quicker)
EAD is really worth having, especially in IT, because finding jobs with same or similar job description is not difficult.
Even if not in IT, the ability to start working for someone without bothering that employer to sponsor your H1 is a HUGE PLUS. HUGE and I mean really really really HUGE.
Also, if you are in IT, and if job market becomes worse, then employers have more choice and during those times, they get picky and choosy and ask for candidates who have work authorization (Meaning, EAD or GC or citizenship) so that they dont have to sponsor H1 and go thru those hassles. (employers get sick of USCIS delays too).
Therefore, whether you want to stay with same employer, or change to new one, having EAD is a big benefit because having EAD is same as having GC (after 180 days of 485 filing) with one caveat : with GC, you can change profession, or stay at home and not work....with EAD, you need to work and you need to be within the same job description.
Not to mention, the travel benefits. When 485 is pending, in addition to EAD, you get AP for travel and AP is guaranteed re-entry after a visit outside USA. IF on H1, you need to have H1 stamp and if H1 stamp on passport is expired then you have to spend time gathering documents and getting consulate appointment and getting H1 stamp -- Something that causes unneccesary anxiety and too much heartburn and potentially ruins the vacation due to anxiety.
more...
ItIsNotFunny
09-22 04:43 PM
Ignore distractors. Keep calling please. Play now and pay for ever or pay (20 minutes) now and play for ever.
hair quotes on your wall.
h1bnogc
08-29 09:12 AM
Thank you both for sharing your thoughts...
I have an unexpired H-1B visa stamp in my passport and I have contacted my attorney to upgrade the petition to premium. I plan to re-enter the country with the approved I797 and the unexpired H1B visa associated with the previous employer.
For some reason, my attorney feels strongly that I need to get visa stamp in my passport from either canada or home country(India), if the petition is approved. Do you see any strong reason why he thinks I need a visa stamp in my passport?
I have tried to convince him that people do re-enter with the approved I797 with attached I94, as long as they have an unexpired visa of the same class.
Immigstories:
Could you please share your experience at POE? many many thanks
I have an unexpired H-1B visa stamp in my passport and I have contacted my attorney to upgrade the petition to premium. I plan to re-enter the country with the approved I797 and the unexpired H1B visa associated with the previous employer.
For some reason, my attorney feels strongly that I need to get visa stamp in my passport from either canada or home country(India), if the petition is approved. Do you see any strong reason why he thinks I need a visa stamp in my passport?
I have tried to convince him that people do re-enter with the approved I797 with attached I94, as long as they have an unexpired visa of the same class.
Immigstories:
Could you please share your experience at POE? many many thanks
more...
retrohatao
07-17 02:41 PM
Am I hysteric or what?
Any ways here is the flash.
My case has been approved and got the so called Magic e-mails stating that the cards have been order
for me and the spouse.
Here is the "series of unfortunate events" :
1.
EB3/TSC
PD: Sometime in 1998
Stuck at labor for three years. Finally cleared in 2000 a month after I was let go.
2. Joined different company in 2001. Encore!!!. Filed GC again in 2001. This time I chose EB2
thought I would save some time.
3. Thanks to the political gimmics, stuck at labor again for three years finally cleared in 2004
4. Elated with the good news, applied i-140 & I-485 in 2004.
5. I-140 cleared without any hitches got EAD too. Expected i-485 to clear with in reasonable
amount of time.
6. Wait!!!, there it goes... the dreaded namecheck stopped it for another two years.
Following is the chronological order:
EB2/TSC
PD : October 17, 2001
LCl : January 7, 2004
RD I140/485 : May 28, 2004
EAD : July 26, 2004
FP Notice Date : February 1, 2005
FP Done : March 22, 2005
I140l : February 11, 2005
Namecheck initiated: June 2004
Namecheck cleared: June 2006.
I-485 cleared and cards ordered: July 2006.
Here is what I did to get out of namecheck:
1. e-mail to FBI on monthly basis
2. Snail mail to FBI, OMBUDSMAN on monthly basis
3. FAX to FBI on monthly basis
3. Involved congressman. Congressman's office contacted USCIS, but did not want to get involved with
FBI directly
4. Involved Senators. Senator's office contacted USCIS, but did not want to get involved with
FBI directly. One senator never even responded
5 got FOPIA.
6. Made the attorney to contact USCIS officially
7. Started the group "namechektracker" on yahoo groups http://groups.yahoo.com/group/namechecktracker/ (http://groups.yahoo.com/group/namechecktracker/)
and almost filed WOM. Only thing left is to send the papers.
8. Tried some contacts with USCIS despite the "NO" from the attorney and the employer.
Just tried some personal mails to USCIS director FBI et all.
Not sure what really worked. Some one from DOJ took time to call me and informed that my
name check got cleared.
moral: Keep your eyes/ears open. DO NOT JUST BELIEVE the words of your attorney.
try the above steps and hope for the best.
Thanks to the forum members!!! I learnt lot from your experience.
I will still be around on this forum and will try to help as much as I can
Any ways here is the flash.
My case has been approved and got the so called Magic e-mails stating that the cards have been order
for me and the spouse.
Here is the "series of unfortunate events" :
1.
EB3/TSC
PD: Sometime in 1998
Stuck at labor for three years. Finally cleared in 2000 a month after I was let go.
2. Joined different company in 2001. Encore!!!. Filed GC again in 2001. This time I chose EB2
thought I would save some time.
3. Thanks to the political gimmics, stuck at labor again for three years finally cleared in 2004
4. Elated with the good news, applied i-140 & I-485 in 2004.
5. I-140 cleared without any hitches got EAD too. Expected i-485 to clear with in reasonable
amount of time.
6. Wait!!!, there it goes... the dreaded namecheck stopped it for another two years.
Following is the chronological order:
EB2/TSC
PD : October 17, 2001
LCl : January 7, 2004
RD I140/485 : May 28, 2004
EAD : July 26, 2004
FP Notice Date : February 1, 2005
FP Done : March 22, 2005
I140l : February 11, 2005
Namecheck initiated: June 2004
Namecheck cleared: June 2006.
I-485 cleared and cards ordered: July 2006.
Here is what I did to get out of namecheck:
1. e-mail to FBI on monthly basis
2. Snail mail to FBI, OMBUDSMAN on monthly basis
3. FAX to FBI on monthly basis
3. Involved congressman. Congressman's office contacted USCIS, but did not want to get involved with
FBI directly
4. Involved Senators. Senator's office contacted USCIS, but did not want to get involved with
FBI directly. One senator never even responded
5 got FOPIA.
6. Made the attorney to contact USCIS officially
7. Started the group "namechektracker" on yahoo groups http://groups.yahoo.com/group/namechecktracker/ (http://groups.yahoo.com/group/namechecktracker/)
and almost filed WOM. Only thing left is to send the papers.
8. Tried some contacts with USCIS despite the "NO" from the attorney and the employer.
Just tried some personal mails to USCIS director FBI et all.
Not sure what really worked. Some one from DOJ took time to call me and informed that my
name check got cleared.
moral: Keep your eyes/ears open. DO NOT JUST BELIEVE the words of your attorney.
try the above steps and hope for the best.
Thanks to the forum members!!! I learnt lot from your experience.
I will still be around on this forum and will try to help as much as I can
hot quotes on your wall. a stylish
sonia_sd
09-14 02:34 PM
The company is very healthy financially and has around 100 employees on payroll. They have successfully processed many GCs for the existing employees in the last 3 years. The irony is one of my friends that filed with me on the same advertisement and profile got his GC 18 months ago!!
jlt007us,
Sorry for your situation & I would suggest you better contact an experienced lawyer...who can advice you closely and assist you in this situation.
Soni-
jlt007us,
Sorry for your situation & I would suggest you better contact an experienced lawyer...who can advice you closely and assist you in this situation.
Soni-
more...
house quotes on your wall. a Wall
chris
07-08 03:35 PM
Why the lawyer need some information from your wife ? ( she no need to apply any thing , since your GC is approved ).
I think best way to tralk to HR dept in your wifes company and explain them. that you will get GC soon. If they need some proof show them approval email .
If they ask to fill i9 form show the EAD as proof for employment eligibility.
New company lawer is not accepting EAD, even though we don't have written approval confiramtion
How to conivince him to use EAD unti we got the phisical card?
I think best way to tralk to HR dept in your wifes company and explain them. that you will get GC soon. If they need some proof show them approval email .
If they ask to fill i9 form show the EAD as proof for employment eligibility.
New company lawer is not accepting EAD, even though we don't have written approval confiramtion
How to conivince him to use EAD unti we got the phisical card?
tattoo The great hope quotes at your
felix31
11-15 05:16 PM
And dont forget that teacher's H1 also comes under the cap. You would need to get interviewed for a position and get an offer before April 1st, so that application can be received at USCIS on April 1st.
Usually, H1s run out within couple of days, last time it was one day or two days. I forgot the details.
The only way to avail of Masters H1 cap is to have US Masters degree.
Some schools also do J1 for teachers. Try VIF program at www.vifprogram.com
Once you get into the school system you can also go for a masters degree and if the school principle wants to keep you, HR can file for your H1. All that is possible if you immediately file for a Home Country Requirement waiver.
It sounds complicated, but for teachers this may be the only open route.
H1 visas are in such high demand anyway.
Hope this helps!
Good luck!
Usually, H1s run out within couple of days, last time it was one day or two days. I forgot the details.
The only way to avail of Masters H1 cap is to have US Masters degree.
Some schools also do J1 for teachers. Try VIF program at www.vifprogram.com
Once you get into the school system you can also go for a masters degree and if the school principle wants to keep you, HR can file for your H1. All that is possible if you immediately file for a Home Country Requirement waiver.
It sounds complicated, but for teachers this may be the only open route.
H1 visas are in such high demand anyway.
Hope this helps!
Good luck!
more...
pictures Wall Decals are a fun and easy
bunan
01-07 02:47 PM
The best course is file I-140 for EB3... after you get it... file for EB2 I-140 and use PD from EB3... It's possible and worth every effort.
Absolutely possible and I have done it too. Please talk to your lawyer directly as he can advise you better.
Absolutely possible and I have done it too. Please talk to your lawyer directly as he can advise you better.
dresses quotes on your wall. quotes on
ivar
09-11 11:04 AM
I read some posts from the thread you mentioned and i was not able to read it entirely as it was a very long thread. I couldn't figure out what changed with respect to EB2 job zones. I have filed my current perm in EB2 with senior software engineer title and i am not sure what will happen to that. I am in this country for 5 years and still struggling to get my PERM approved (So far i have filed PERM three times :)) Is there anyone in IV who has got their PERM approved with Priority date from DECEMBER 2008 onwards? This will be little encouraging.
Are there any PERM approvals with priority date after DEC 08? I believe a lot of people on IV have already passed this stage (Many may have EAD by now) and there may not be many in this PERM queue. There are people like us who are still stuck with PERM and need to hear from fellow IVians if they are aware of the reasons for the PERM delays. It is taking more than 10 months to get the regular PERM approvals.
Are there any PERM approvals with priority date after DEC 08? I believe a lot of people on IV have already passed this stage (Many may have EAD by now) and there may not be many in this PERM queue. There are people like us who are still stuck with PERM and need to hear from fellow IVians if they are aware of the reasons for the PERM delays. It is taking more than 10 months to get the regular PERM approvals.
more...
makeup applied to your walls in a
Yeldarb
05-29 08:55 PM
www.barbdwyer.com/profiles/DHSMaroon13 - a simple PHP based AOL Instant Messenger subProfile that I threw together :)
You can view it in its original state by looking at my profile (SN: DHSMaroon13)
You can view it in its original state by looking at my profile (SN: DHSMaroon13)
girlfriend quotes on your wall.
ItIsNotFunny
11-06 04:57 PM
Glad to see your initiatives. But our focus should be different.
The Economy is in very bad shape. Unemployement is rising. At this moment any bill that ask for GC number increase won't pass. We need to wait for atleast few months.
In the meantime as a temprory releif we should push the "Country quoto elimination bill" that does not increase GC numbers.
Also please take a look at my plan that I presented couple of weeks earlier. It is a compromise bill and I feel it has the best chance to pass during lameduck session. My plan gives at least some releif to people waiting for 7 years or waiting for months with PD current.
Please keep the spirit alive. Thanks.
You are right. I guess GC for House concept may fly. Guys, think over it!
The Economy is in very bad shape. Unemployement is rising. At this moment any bill that ask for GC number increase won't pass. We need to wait for atleast few months.
In the meantime as a temprory releif we should push the "Country quoto elimination bill" that does not increase GC numbers.
Also please take a look at my plan that I presented couple of weeks earlier. It is a compromise bill and I feel it has the best chance to pass during lameduck session. My plan gives at least some releif to people waiting for 7 years or waiting for months with PD current.
Please keep the spirit alive. Thanks.
You are right. I guess GC for House concept may fly. Guys, think over it!
hairstyles quotes on your wall. quotes
LostInGCProcess
10-01 04:51 PM
In what sense he is racist? I could not understand, please explain to me.
nogc_noproblem
04-15 12:51 PM
9 Years, with one employer!!! immmm..
If the employer is good it is ok, what if not?
I don�t know how many of our most productive life time is going to be stagnated because of this GC wait.
Lunch Time (EST), on the lighter note�.
Tourists in the Museum of Natural History ...
...were marveling at the dinosaur bones. One of them asks the blonde guard, 'Can you tell me how old the dinosaur bones are?'
The guard replies, 'They are 3 million, four years, and six months old.'
'That's an awfully exact number,' says the tourist. 'How do you know their age so precisely?'
The guard answers, 'Well, the dinosaur bones were three million years old when I started working here, and that was four and a half years ago!'
If the employer is good it is ok, what if not?
I don�t know how many of our most productive life time is going to be stagnated because of this GC wait.
Lunch Time (EST), on the lighter note�.
Tourists in the Museum of Natural History ...
...were marveling at the dinosaur bones. One of them asks the blonde guard, 'Can you tell me how old the dinosaur bones are?'
The guard replies, 'They are 3 million, four years, and six months old.'
'That's an awfully exact number,' says the tourist. 'How do you know their age so precisely?'
The guard answers, 'Well, the dinosaur bones were three million years old when I started working here, and that was four and a half years ago!'
kirupa
08-20 12:36 PM
Hi cakewalkr7!
For your first question, the reason is that when animating, the height of an element is not what gets changed by default when you use the adorners. A RenderTransform with ScaleY changes instead.
What you want to do is set the actual Height property to 0 on the properties inspector at a given keyframe. That should give you the effect that you want. Here is a small XAML snippet that allows you to do that:
<Window.Resources>
<Storyboard x:Key="Storyboard1">
<DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="grid" Storyboard.TargetProperty="(FrameworkElement.Height)">
<SplineDoubleKeyFrame KeyTime="00:00:00.5000000" Value="0"/>
</DoubleAnimationUsingKeyFrames>
</Storyboard>
</Window.Resources>
<Window.Triggers>
<EventTrigger RoutedEvent="FrameworkElement.Loaded">
<BeginStoryboard Storyboard="{StaticResource Storyboard1}"/>
</EventTrigger>
</Window.Triggers>
<Grid x:Name="LayoutRoot">
<StackPanel>
<Grid Height="100" Background="#FFF5FF00" x:Name="grid"/>
<Grid Height="100" Background="#FF00B3FF"/>
</StackPanel>
</Grid>
For your second question, there isn't an easy way to do that without writing code. This tutorial should help: http://www.kirupa.com/blend_wpf/modifying_animations_pg1.htm What you would vary is the Storyboard.TargetName, and that would point to the appropriate Grid that you are interested in animating.
Let me know if that helps or if you need more info.
Cheers!
Kirupa :)
For your first question, the reason is that when animating, the height of an element is not what gets changed by default when you use the adorners. A RenderTransform with ScaleY changes instead.
What you want to do is set the actual Height property to 0 on the properties inspector at a given keyframe. That should give you the effect that you want. Here is a small XAML snippet that allows you to do that:
<Window.Resources>
<Storyboard x:Key="Storyboard1">
<DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="grid" Storyboard.TargetProperty="(FrameworkElement.Height)">
<SplineDoubleKeyFrame KeyTime="00:00:00.5000000" Value="0"/>
</DoubleAnimationUsingKeyFrames>
</Storyboard>
</Window.Resources>
<Window.Triggers>
<EventTrigger RoutedEvent="FrameworkElement.Loaded">
<BeginStoryboard Storyboard="{StaticResource Storyboard1}"/>
</EventTrigger>
</Window.Triggers>
<Grid x:Name="LayoutRoot">
<StackPanel>
<Grid Height="100" Background="#FFF5FF00" x:Name="grid"/>
<Grid Height="100" Background="#FF00B3FF"/>
</StackPanel>
</Grid>
For your second question, there isn't an easy way to do that without writing code. This tutorial should help: http://www.kirupa.com/blend_wpf/modifying_animations_pg1.htm What you would vary is the Storyboard.TargetName, and that would point to the appropriate Grid that you are interested in animating.
Let me know if that helps or if you need more info.
Cheers!
Kirupa :)
No comments:
Post a Comment